Categories

Posts Tagged ‘LCR meter’

Elektor 500ppm LCR meter case tips

Friday, April 1st, 2016

NopHead wrote a blog post review of Elektor 500ppm LCR meter: I recently bought a 500ppm LCR meter from Elektor because I didn't have anything for measuring inductors or the ESR (equivalent series resistance) of capacitors, both of which are important for modern electronics, particularly switch mode regulators that have become ubiquitous....

Tags: , ,
Posted in tools | 5 Comments »

Multimeter recommendations

Saturday, July 9th, 2011

sqkybeaver on choosing a multimeter: ...if you use eBay,  for an entry i would recommend something like this with dmm (a second or third dmm is all ways good to have) this is as fairly accurate as a hobbyist would need. for a more advanced user I'd go with new BK precision...

Tags:
Posted in tools | 3 Comments »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please