Categories

Posts Tagged ‘FFT pyQtGraph’

Tiva C launchpad FFT with real time plotting using pyQtGraph

Wednesday, July 15th, 2015

Shane of Wattnotions writes: The biased signal generator signal is connected to AnalogIn 1 on the Tiva C which is pin PE_2. Signal Gen and Tiva C ground is common. The two 10k resistors from a voltage divider which will halve the 3v input to give a 1.5 v bias......

Tags: ,
Posted in ARM, scripts | Comments Off on Tiva C launchpad FFT with real time plotting using pyQtGraph

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please