Categories

Posts Tagged ‘dual power supply’

+/-12V dual power supply

Tuesday, July 29th, 2014

A power supply build by Rajkumar of Electronics Lab: This project is a solution to power up most of devices or projects requiring dual (+/-12V) power supply. Symmetric +/-12 VDC power supply has been designed for audio applications, can power up microphone pre-amplifier, audio buffers, audio mixer, distributions amplifier, headphone amplifier, VU...

Tags: ,
Posted in power supply | No Comments »

App note: Dual 1.4MHz buck regulator with USB ‘Dying Gasp’ support

Saturday, December 10th, 2011

This app note from Maxim describes how to build a USB powered circuit that will provide a short power-failure notice before losing power. This is called the "Dying Gasp" and it allows devices to preform a proper shut-down when USB power fails. A safe USB "dying gasp" shutdown requires a...

Tags: , , ,
Posted in app notes | No Comments »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please