Posts Tagged ‘business card’


Tuesday, May 8th, 2018

Stylophone business card project from Printed Circuit Boards as a business card are a great gimmick. I'd seen ones with USB ports etched into them, which enumerate as a keyboard and then type a person's name or load up their website. It's just about possible to build them cheap enough...

Posted in PCBs, techniques | 5 Comments »

PCB Businesscard Nextgen: NFC enabled

Tuesday, October 3rd, 2017

A followup to the PCB business card post,  Sjaak writes: Designing a PCB business card seems to be the go-to for a hobbyist electronic engineers. Most people design either a passive PCB, USB HID/MSD device or battery powered LED frenzy. Uptill now I haven’t seen any cart that has a...

Posted in PCBs | No Comments »

Pimp your PCB businesscard full color

Wednesday, July 26th, 2017

Here is a nice PCB businesscard @ As a good electronic hobbiest tradition I started to design a businesscard from PCB material. Downside of all the businesscards (and PCBs in general) is the limited number of colors you can use: FR4, soldermask (with or without copper behind it), silkscreen...

Tags: ,
Posted in PCBs, techniques | No Comments »

Making a PCB business card

Tuesday, September 29th, 2015

Ilia Baranov has designed a reference business card: Back of card includes: Ruler in both 1/10" and mm. AWG Hole size gauge (not super accurate due to plating, but that is unavoidable) Resistor/capacitor/inductor/diode sizes Common surface mount component sizes Common electrical symbols and shortcuts/equations Common conversions Trace size comparison Quote from...

Tags: , ,
Posted in, PCBs | No Comments »

DirtyPCB Arduino business card

Monday, May 4th, 2015

Here's an instructable by ProtoG on how to make your own PCB business card: In this instructable I am going to show you how to make your own printed circuit board business card. I feel that these business cards will really help you stand out from the crowd and make a...

Tags: , ,
Posted in Arduino, tutorials | No Comments »

Business Card version 2

Thursday, November 21st, 2013

Brian posted an article describing how he designed and built his business card: A business card should represent a person’s expertise. My expertise is in creating unique circuit boards, so to celebrate this I wanted to create a USB thumb drive circuit that contains my resume and contact information. This was also a...

Posted in USB | 2 Comments »

Tiny USB business card

Friday, November 5th, 2010

A cool USB business card. This one is a little different than some of the mass storage device business cards we've covered before. It enumerates as a keyboard and dumps contact info into notepad. Via Hack a Day.

Tags: ,
Posted in USB | No Comments »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please