Categories

Posts Tagged ‘BMP180’

BMP180 based USB atmospheric pressure monitor

Wednesday, December 26th, 2018

Dilshan Jayakody published a new build: We initially developed this USB atmospheric pressure monitor to study some operating characteristics of Bosch BMP180 sensor. BMP180 is low cost sensor to measuring barometric pressure and temperature. According to the data sheet this sensor can use to measure pressure ranging between 300hPa to...

Tags: , ,
Posted in sensors, USB | No Comments »

Using BMP180 for temperature, pressure and altitude measurements

Monday, April 11th, 2016

Raj from Embedded Lab has posted a comprehensive tutorial on how to use BMP180 for temperature, pressure, and altitude measurements: The BMP180 is a new generation digital barometric pressure and temperature sensor from Bosch Sensortec. In this tutorial, we will briefly review this device and describe how to interface it with...

Tags: , ,
Posted in tutorials | No Comments »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please