Categories

Posts Tagged ‘AVR microcontroller’

SmallyMouse2 – Universal USB to quadrature mouse adapter

Tuesday, June 6th, 2017

Designed and built by Simon Inns, a universal USB to quadrature mouse adapter project - SmallyMouse2: SmallyMouse2 is a universal USB to quadrature mouse adapter for many 8-bit and 16-bit retro computers and allows the use of modern USB mice on machines such as the Acorn BBC Micro, Acorn Master, Acorn...

Tags: ,
Posted in AVR, USB | No Comments »

Automatic plant watering system using AVR(Atmega16) Microcontroller

Thursday, November 20th, 2014

Here's an automatic watering system using AVR from Gadgetronicx: Primitive irrigation systems possess many drawbacks as it fails to conserve water and human energy. So introducing Automation in it can help us to overcome these drawbacks and pave way to conserve water. This can be done with a simple Soil moisture...

Tags: ,
Posted in AVR, sensors | 5 Comments »

USB to Serial converter using AVR microcontroller

Monday, June 9th, 2014

Yet another great project by Dr. Ayman Shalaby of Electronics Lab, a USB to Serial converter using an ATMEL AVR microcontroller: This project is a USB to Serial converter using an ATMEL AVR microcontroller. There are two version of the converter, one with SMD parts and another with TH parts. The mcu...

Tags: ,
Posted in AVR, USB | 7 Comments »

ATpirate adapter kit

Wednesday, October 6th, 2010

Eric from allthingsgeek.com writes: My friend and I work with a lot of different AVR microcontrollers. We love using the bus pirate to program them but find it inconvenient to setup a breadboard and look-up the datasheet for each one. We designed a ZIF socketed kit to make the process...

Tags: ,
Posted in AVR, Bus Pirate | 1 Comment »

Recent Comments

  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...