Categories

Posts Tagged ‘AVR MCUs’

Breadboard programming cable for ATtiny85, ATtiny88, ATmega328, ATtiny2313, and other AVR MCUs

Friday, April 11th, 2014

Here's a breadboard programming cable for ATtiny85, ATtiny88, ATmega328, ATtiny2313, and other AVR MCUs by Nerd Ralph For programming AVR MCUs, I use a USBasp. Initially, I would connect the USBasp header pins to header pins on the breadboard with individual jumper wires, then jumper the appropriate pins on the MCU....

Tags: ,
Posted in how-to | No Comments »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please