Categories

Posts Tagged ‘ARM Cortex M3’

Bit-banding explained: A key feature of ARM Cortex-M3/M4

Friday, December 29th, 2017

Yahya Tawil over at Atadiat wrote in to let us know about a corner-stone feature in ARM Cortex-M3 processors called bit-banding: Writing a portable code is one of the concerns for developers, and while dealing with bit-fields is not standard in all compilers, it is not very advisable to use....

Tags: ,
Posted in ARM | No Comments »

LPC1769 debugging with the Bus Blaster

Wednesday, September 4th, 2013

Alvaro wrote a post on his blog detailing how to debug LPC1769 with the Bus Blaster: After getting the gcc-arm compiler working with the mbed, I decided to take a look at my LPCXpresso LPC1769 development board. The mbed is really easy to program. It mounts as a flash drive...

Tags: ,
Posted in Bus Blaster | 1 Comment »

USBug LPC1343 development board update

Wednesday, May 16th, 2012

A few days ago we wrote about the open source USBbug LPC1343 development board designed by Squonk. He started a GitHub page for his project, and shared the first pic of the built board. Via the forum.

Tags: , ,
Posted in open source, project logs | 3 Comments »

Recent Comments

  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...