Inductive spike on voltage rails causes eFuse to shutdown, here’s an app note from ON Semiconductors on how they solve this problem from happening. Link here (PDF)
ON Semiconductor produces a wide variety of silicon based protection products including current limiting devices such as Electronic Fuses (eFuses). During an over−current stress, eFuses can limit the current applied to a load as well as remove power from the load entirely. This fundamental feature of the eFuse makes it an easy choice to protect against inrush currents which can be seen on power lines of hard−disk drive (HDD) and enterprise−server systems during hot−plug operation or load−fault conditions. During the eFuse current limiting operation, the threat exists of an inductive spike on the power line (VCC) at the point of device turn−off due to thermal shutdown. This Application Note will discuss the failure mechanism this threat exposes the eFuse to, and will explain how to combat it by adding compensation capacitors onto the power line when using the auto−retry (MN2) version of the eFuse.