Categories

App note: Dimming LEDs with respect to grouping current

Posted on Sunday, August 4th, 2019 in app notes by DP

an_osram_AN043

App note from OSRAM describing the behaviour of LEDs in respect to brightness by varying the current and to suggest solutions for avoiding negative influence for the application. Link here (PDF)

In the design of a driving circuit for LEDs, the dimming behaviour is an important topic to fulfill the end customer requirements. The behaviour of the LEDs in respect to brightness is investigated by varying the current and solutions for avoiding negative influence for the application are suggested.

This entry was posted on Sunday, August 4th, 2019 at 1:15 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please