Categories

Simple digital clock with PIC16F628A and DS1307 and 7-segment LED display

Posted on Thursday, June 13th, 2019 in clock, DIY by DP

DigiClock1

A simple digital clock with PIC16F628A + DS1307:

In this new project I am again using PIC16F628A microcontroller. The goal is simple digital clock with 7-segment LED display and the clock will have no additional functionality – no alarm, no seconds digits, no date. The latter can be added in the software though. For the RTC chip I chose DS1307. For the LED display I used Kingbright CC56-21SRWA.

More details on DIYfan blog.

Check out the video after the break.

This entry was posted on Thursday, June 13th, 2019 at 11:25 pm and is filed under clock, DIY. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • gant: They still have a couple of the more expensive (but still considerably cheap) 5S-I-S01 in stock...
  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!