Categories

Control the bicycle traffic signal with a Particle Photon

Posted on Wednesday, June 5th, 2019 in LEDs, wireless by DP

IMG_20190603_185941-edited

Glen has been working on a Wi-Fi enabled bicycle traffic signal project:

In the first post in this series, we built a miniature LED bicycle traffic signal using 3D printing, laser cutting, a sticker, and an Adafruit Neopixel Jewel. In this post, we’ll look at bringing the signal to life using a Particle Photon. We’ll start with basic code to blink the traffic signal green, yellow, and red then add code to control the color over the web using the Particle Cloud or locally using an iPad and the Art-Net protocol.

More details on Photons, Electrons, and Dirt blog.

This entry was posted on Wednesday, June 5th, 2019 at 11:48 pm and is filed under LEDs, wireless. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please