Categories

App note: Color sensing improves look and feel of smart products

Posted on Sunday, May 19th, 2019 in app notes by DP

an_renesas_color-sensing-improves-user-interfaces

Renesas’ white paper on applications of RGB sensors. Link here (PDF)

Color printers also require an accurate sensor to ensure that during calibration and printing the correct amount of ink is being deposited onto the paper—an essential requirement when the target output is for color photographs.

This entry was posted on Sunday, May 19th, 2019 at 5:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please