Categories

App note: Receiving S/PDIF audio stream with the STM32F4/F7/H7 series

Posted on Sunday, March 17th, 2019 in app notes by DP

an_stm_DM00431633

App note from STMicroelectronics about electrically connecting an external S/PDIF stream to an STM32 with an S/PDIFRX interface peripheral, Link here (PDF)

The Sony/Philips Digital Interface Format (S/PDIF) is a point-to-point protocol for serial and uni-directional transmission of digital audio through a single transmission line for consumer and professional applications. The transmission of data can be done in several ways, by electrical or optical means.

The S/PDIFRX peripheral embedded in STM32 devices is designed to receive an S/PDIF flow compliant with IEC-60958 and IEC-61937, which define the physical implementation requirements as well as the coding and the protocol. These standards support simple stereo streams up to high sample rates, and compressed multi-channel surround sound, such as those defined by Dolby or DTS.

This entry was posted on Sunday, March 17th, 2019 at 1:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...