Categories

Tutorial: Booting the NXP i.MX RT from Micro SD card

Posted on Wednesday, January 23rd, 2019 in ARM, tutorials by DP

sd-card-with-i.mx-rt1052

Erich Styger has written an article on how to boot the NXP i.MX RT from Micro SD card:

It is a common thing to boot a Linux system (see the Raspberry Pi) from a micro SD card. It is not that common for a microcontroller. The NXP i.MX RT ARM Cortex-M7 fills that gap between these two worlds. No surprise that it features a ROM bootloader which can boot from a micro SD card.
Booting from a SD card is kind of cool: load a new software to the card, insert it and boot from it. In some applications this can be very useful: in my configuration the processor starts the ROM bootloader, then loads the image from the SD card into RAM and then runs it. In that configuration no internal or external FLASH memory would be needed.

Via MCU on Eclipse.

This entry was posted on Wednesday, January 23rd, 2019 at 3:37 pm and is filed under ARM, tutorials. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please