Categories

App note: Increasing accuracy in feedback circuits and voltage dividers with thin film chip resistor arrays

Posted on Sunday, January 20th, 2019 in app notes by DP

an_vishay_incresarr

App note from Vishay on using chip resistors to achieve long-term stability. Link here (PDF)

Thin film chip resistor arrays consist of several resistors of equal or different values combined in one package. During the manufacturing processes and the device’s lifecycle, all the particular resistors virtually experience identical conditions, which allow the specification of their relative tolerances, relative temperature coefficients, and even a relative resistance drift. These relative parameters provide precise and stable resistance ratios and far better long-term stability of feedback circuits and voltage dividers compared to discrete resistors.

This entry was posted on Sunday, January 20th, 2019 at 5:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “App note: Increasing accuracy in feedback circuits and voltage dividers with thin film chip resistor arrays”

  1. Excellent tip, please keep these coming. Thanks!

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please