Categories

App note: Quad-SPI (QSPI) interface on STM32 microcontrollers

Posted on Sunday, December 23rd, 2018 in app notes by DP

an_stm_DM00227538

Extend memories by using external high speed memories interfaced to Quad-SPI modules on STM32 micros, app note from STMicroelectronics. Link here (PDF)

This application note describes the Quad-SPI interface on the STM32 microcontrollers and explains how to use the module to configure, program, and read external Quad-SPI memories. It describes some typical use cases to use Quad-SPI interface based on some software examples from the STM32Cube firmware package and from the STM32F7 application notes.

This entry was posted on Sunday, December 23rd, 2018 at 1:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please