Categories

ETA Nixie tube clock

Posted on Wednesday, May 30th, 2018 in clock, DIY, Nixie by DP

ETA Nixie Tube Clock-600

Mark Smith over at surfncircuits has a nice write-up about building an ETA Nixie Tube Clock:

This DIY project will combine the estimated time of arrival function with a Nixie tube display to create an estimated time of arrival (ETA) Nixie tube clock. It is all easily controlled by a Raspberry Pi Zero W that is connected to the internet through WiFi to provide the latest time and gets the ETA for any number of destinations. The travel time is provided by the free Google Directions API interface that includes traffic to give the best estimates on any particular day.   The goal is that with an ETA Nixie tube clock, no math is needed to add a rough, often optimistic travel time, to the actual time to determine if we are running late.   The clock does that for you and with the power of IOT, is much more accurate!    A motion sensor is also added to the clock to turn off the Nixie Tube Display when no one is around, saving power and increasing the Nixie tube lifetime.

Build log at www.surfncircuits.com. Project files are located at Github.

This entry was posted on Wednesday, May 30th, 2018 at 9:36 pm and is filed under clock, DIY, Nixie. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Michael: A feature I've wanted forever is a dual RX UART mode, so I can watch both sides of a UART communication between devices (right now...
  • Alex B: To see the current commit hash, "git rev-parse HEAD"
  • Daniel: Very nice! Welcome to this century...
  • chrismec: What is this Bus Pirate v5? Is this the demo board or is there a new bus pirate in the works?
  • John Peck: Really impressive! Thanks for putting so much documentation together!