Categories

App note: Microphone specifications explained

Posted on Sunday, January 14th, 2018 in app notes by DP

an_tdk_an1112

All about MEMS microphone from TDK Invensense. Link here (PDF)

A MEMS microphone IC is unique among InvenSense, Inc., products in that its input is an acoustic pressure wave. For this reason, some specifications included in the data sheets for these parts may not be familiar, or familiar specifications may be applied in unfamiliar ways. This application note explains the specifications and terms found in MEMS microphone data sheets so that the microphone can be appropriately designed into a system.

This entry was posted on Sunday, January 14th, 2018 at 1:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • KH: After reading all the comments, I have questions: Does this mean STM32 and AVR boards/parts from dodgy online sellers are suspect? What are your opinions?...
  • Sjaak: They are available with more flash then their ST counterparts which makes them more interesting. You don't have to port the code, but use another...
  • Sjaak: I dunno if you can 'license' register definitions, but I'm not a lawyer. Since the chip is available since 2015 and I haven't heard of...
  • Sjaak: They can be found on taobao or the Chinese markets in Shenzhen.
  • KH: I've been a really good boy, I only buy MCU parts from RS and Farnell. :-)