Categories

Sense energy monitor teardown – sampling in MHz

Posted on Thursday, December 21st, 2017 in Teardowns by DP

Sense Energy monitor teardown

Tisham Dhar did a teardown of a Sense Energy monitor:

Recently I obtained a Sense Energy monitor via US from Margaret of BitKnitting. She is doing a very interesting neighbourhood energy efficiency project. As usual I could not contain my curiosity and opened it up to have a look. I will start off with an analogy – the closest bit of open-source kit that I have to do half the amount of analog functions as the Sense is the PRUDAQ on the BeagleBone wifi

More details on his blog.

This entry was posted on Thursday, December 21st, 2017 at 11:35 pm and is filed under Teardowns. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Drone: Gee, just the sight of one of these HP493A TWT laboratory amps brings back decades-old memories. There are four models covering 1-12.4 GHz in steps...
  • KH: After reading all the comments, I have questions: Does this mean STM32 and AVR boards/parts from dodgy online sellers are suspect? What are your opinions?...
  • Sjaak: They are available with more flash then their ST counterparts which makes them more interesting. You don't have to port the code, but use another...
  • Sjaak: I dunno if you can 'license' register definitions, but I'm not a lawyer. Since the chip is available since 2015 and I haven't heard of...
  • Sjaak: They can be found on taobao or the Chinese markets in Shenzhen.