Categories

App note: Current sensing in metering applications using a pulse current sensor and ST metering devices

Posted on Sunday, December 3rd, 2017 in app notes by DP

an_stm_CD00289924

App note from STMicroelectronics about current sensing using Rogowski coil together with STPMxx metering device. Link here (PDF)

This application note describes the benefits of a current sensing system for metering applications using STPMxx metering devices and a current sensor developed by Pulse Engineering Inc. (hereafter referred to as “Pulse current sensor”), based on the Rogowski coil principle. Following an overview of the Rogowski coil principle, the Pulse current sensor is introduced along with a comparison to other current measuring devices. This is followed by a presentation of the characteristics of the STPMxx family of metering devices, and the results of accuracy testing conducted using a demonstration board with the STPM01 and the Pulse current sensor.

This entry was posted on Sunday, December 3rd, 2017 at 5:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Edward Mallon: While I loved the Nokia 5110 LCD's readability in full sun, the pressure sensitivity was a real problem for the underwater units. So I started...
  • ConnyCola: I like this article a lot! And in contrast to Max I love to hear what you guys are doing in Shenzen and Hong Kong....
  • Max: Thanks for the writeup, it's always interesting to read about a different culture. Other than that though I'm afraid I was spoiled by living neither...
  • Tepa: Heps keikkaa
  • Dan: Pick Me!!!