Categories

Tutorial, experiments and teardown of a 77GHz automotive FMCW radar module

Posted on Friday, June 2nd, 2017 in RF, Teardowns by DP

Radar-300x167

Tutorial, experiments and teardown of a 77GHz automotive FMCW radar module from The Signal Path:

In this episode Shahriar explores the principle operation of automotive FMCW radars. Thanks to a donated automotive radar module, various components of the system can be examined and explored. The PCB reveals three die-on-PCB ASICs responsible for generating and receiving 77GHz FMCW signals coupled to a 2D array of antennas. Several microwave components such as rat-race couplers and branchline couplers can also be observed. PCB rulers from SV1AFN Design Lab also show these microwave components at much lower frequencies. Two other ICs are used for ramp generation and PLL as well as a multi-input LNA/PGA/AAF with 12-bit ADC for IF processing. All components are examined under the microscope and the frequency of operation is calculated by measuring the branchline coupler’s dimensions.
Finally a simple Doppler effect radar is constructed by using a doubler, power divider, mixer and a pair of Vivaldi horn antennas. The Doppler effect can be observed by moving an object in front of the antenna pair.

More details at thesignalpath.com.

Check out the video after the break.

This entry was posted on Friday, June 2nd, 2017 at 4:26 pm and is filed under RF, Teardowns. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please