Categories

DIY polarity Led tweezers

Posted on Thursday, May 4th, 2017 in DIY, tools, tutorials by DP

cover-624x166

Jesus Echavarria shared detailed instructions of how to make a simple tweezers for checking led polarity:

I usually assemble by hand all the boards I make. I use SMD components, especially in 0805 format for resistors, capacitors and leds. With the last ones, I always have the same problem: I need to check the polarity of it, to ensure that I assemble on the right way. To do it, I need the multimeter, select the diode position and test the led’s for the right polarity. Because on the assembly process I don’t usually the multimeter, why don’t make a tweezers to test the led’s? It’s an easy and very cheap project, and you’ll have a usefull tool when assembly boards. Here’s the result, after a couple of hours working on it ;).

More details at Jesus Echavarria’s blog.

This entry was posted on Thursday, May 4th, 2017 at 10:54 pm and is filed under DIY, tools, tutorials. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Jack: I hope everyone at Dangerous Prototypes wins a share of the MegaMillions jackpot tonight.
  • Edward Mallon: While I loved the Nokia 5110 LCD's readability in full sun, the pressure sensitivity was a real problem for the underwater units. So I started...
  • ConnyCola: I like this article a lot! And in contrast to Max I love to hear what you guys are doing in Shenzen and Hong Kong....
  • Max: Thanks for the writeup, it's always interesting to read about a different culture. Other than that though I'm afraid I was spoiled by living neither...
  • Tepa: Heps keikkaa