Categories

An AVR Atmega library for multiple HD44780 based LCD connected through i2c

Posted on Thursday, August 4th, 2016 in AVR, library by DP

pic-LCD_PCF8574_I2C_multiple_library_circuit_sample-600

Davide Gironi has posted an I2C multiple HD44780 AVR Atmega library:

This library implements a driver for HD44780 lcd connected through PCF8574 port expander.
Data is transmitted using only 2 wire over i2c with the PCF8574.
This library can drive up to 8 LCD concurrently.
Lcd driver is based upon Peter Fleury’s lcd driver
HD44780 to i2c library its based upon this library

More details at Davide Gironi’s blog.

Check out the video after the break.

This entry was posted on Thursday, August 4th, 2016 at 3:55 pm and is filed under AVR, library. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...