Application note from Littelfuse about their (IS) intrinsically safe fuse which doesn’t produce sufficient heat that could trigger sparks which are dangerous in an explosive environment. Link here (PDF)
Gases, petroleum products, and airborne dusts tend, by their very nature, to be explosive if sources of sparks or excess heat are present. Over the years, these hazards have led to some catastrophic losses of life and property. In response to this hazardous potential, regulatory bodies around the world, including Underwriters Laboratories, Inc., have worked to establish and refine a standard that will minimize the hazards associated with these working environments. UL 913, which was originally issued in 1971, establishes the standard for “Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III, Division 1, Hazardous (Classified) Locations.”
The purpose of this standard is to specify requirements for the construction and testing of electrical apparatus, or parts of such apparatus, having circuits that are not capable of causing ignition in Division 1 Hazardous (Classified) Locations as defined in Article 500 of the National Electrical Code, ANSI/NFPA 70. Limiting exposure to high surface temperatures and requirements for dust-tight enclosures are key aspects of the UL913 standard.