Categories

Nixie thermometer

Posted on Monday, February 15th, 2016 in DIY, Nixie by DP

nixie-61

Luca Dentella has developed a Nixie thermometer to measure the temperature of the liquid cooling system, that is available on Github.

 I decided to log the design and the development of the project in ten blog posts. They show my “divide et impera” approach: I divided the whole project in small tasks (drive a nixie with Arduino, read the temperature from a thermistor, use an rgb led module, prepare the first prototype on a perfboard, design the pcb, assembly the final product), all described on my blog with examples and videos.

Project info at Lucadentella.it

Check out the video after the break.

This entry was posted on Monday, February 15th, 2016 at 1:08 pm and is filed under DIY, Nixie. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please