Categories

Over the top UCload

Posted on Wednesday, December 30th, 2015 in project logs by DP

ucload_rev2a

Sjaak has published a new build, uC controlled dummy load:

I’m mostly a digital guy, but I’m wanting to design my own power supply. If I’m wanting to test that i need a dummy load. I got inspired by the re:load (www.arachnidlabs.com/reload ). I added a microcontroller, rotary switch, external powersupply input and the obligatory 128×32 OLED :)

Project info at smdprutser.nl.

Via the project log forum.

This entry was posted on Wednesday, December 30th, 2015 at 2:32 pm and is filed under project logs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • KH: So Romanians use old ICs too, a bit reminiscent of Dilshan's projects. I'm vaguely disappointed by the liberal use of float data and float calculations....
  • Max: This is of course no "0-30V" supply - the single-supply standard LM723 schematic can't go all the way down to zero, which is why I...
  • KH: A power-off current draw of 4mA for the Sony A6000 is a defect, product recall territory. It hits the camera battery with unacceptable wear and...
  • Olav Storstrøm: Please add 9-pin D-sub RJ45 and RJ12 connectors! Thanks!
  • KH: Hydroponics is like home automation. Every year you have folks who start projects like these and think it will take off and become a big...