Categories

LED logger v3

Posted on Monday, March 16th, 2015 in AVR, LEDs by DP

DSC_3809

Bogdan of Electro Bob built a LED logger v3, that is available on github:

In short:  16 LED channels are measured, one is kept for control of the sensor. For each LED the power supply and current are measured. The temperature of the aluminium plate is measured as well. In total there are 16 light channels, 15 current channels***, 4 voltage channels and one temperature channel.

This entry was posted on Monday, March 16th, 2015 at 12:50 pm and is filed under AVR, LEDs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please