Categories

Digital data capture unit with EMF reader

Posted on Monday, February 9th, 2015 in PIC by DP

udatalogger-mobile-12mh

Dilshan Jayakody writes:

This is PIC16F73 base digital data capture unit with optional EMF reader. This data capture utility is design to work with most of the analog sensor inputs and by default it is equipped with EMF reader module. This unit use PIC16F73’s internal 8bit ADC to capture the analog signals.
EMF reader unit in this schematic is useful to detect variations of EM field in environment and it is mainly build around uA741 operational amplifier and 12mH detector coil. Normally EMF meters are used to trace electric wires, find hidden transmitters, and diagnose electric wiring problems (and to find ghosts too ☻).

All files and codes are available at elect.wikispaces.com.

This entry was posted on Monday, February 9th, 2015 at 7:00 pm and is filed under PIC. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please