Categories

App note: Tips for writing bulletproof real-time clock control code

Posted on Sunday, July 6th, 2014 in app notes by DP

 

ap_maxim_app5791

Here’s a good app note from Maxim on writing real-time clock code to get a stable system operation.

With the use of proper device initialization and code sequencing, accurate timekeeping and clock alarm operations become a more manageable task.

This entry was posted on Sunday, July 6th, 2014 at 5:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “App note: Tips for writing bulletproof real-time clock control code”

  1. No mention of DST, which is important for lots of MCU timer projects where people want/need to use resources (electricity, water, etc) at certain times of the day.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please