Categories

SMD March – Tweaks to Ishan Kehribar’s ethernet gateway

Posted on Friday, March 28th, 2014 in project logs by DP

DSC04352-small

TomKeddie writes:

For our SMD March workshops I chose Ishan Keribar’s Embedded Ethernet Gateway. I added an FT230X and usb port with a Arduino uno style reset on CTS (230X has no DTR but avrdude toggles both). I also used a SOB 5050 template to make cases easy to design. By adding an 8MHz variant to the Arduino board config you can then download sketches like a Arduino – this is a little more accessible than a STK500.  Unfortunately I made two errors on the PCB, they’re fixed by cutting tracks as seen in the photos.

Via the project log forum.

This entry was posted on Friday, March 28th, 2014 at 11:00 am and is filed under project logs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “SMD March – Tweaks to Ishan Kehribar’s ethernet gateway”

  1. Tom says:

    Please make sure you pull git after this post, I was missing a sync.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • KH: A power-off current draw of 4mA for the Sony A6000 is a defect, product recall territory. It hits the camera battery with unacceptable wear and...
  • Olav Storstrøm: Please add 9-pin D-sub RJ45 and RJ12 connectors! Thanks!
  • KH: Hydroponics is like home automation. Every year you have folks who start projects like these and think it will take off and become a big...
  • KH: Read the linked article. The A6000 has an unusually high standby/sleep current. The adapter's quiescent current is not an issue, but the A6000 sleep current...
  • Drone: Jeez, the very limited DCA: 40A/400A±3.0% capability, no RMS at all, and the CAT=DEATH rating makes this a NO BUY at any price - much...