Categories

A LED Matrix mask built on AVR ATmega8

Posted on Friday, January 3rd, 2014 in AVR, LEDs by DP

Davide Gironi  blogged about his LED matrix mask built on AVR ATmega8:

avr_mask1 wish you a Merry Christmas and a Happy New Year!  AVR Mask1 is a led mask built around 74hc595 shift register and 8×8 led matrix, running on an ATMega8 microcontroller.

This entry was posted on Friday, January 3rd, 2014 at 7:00 pm and is filed under AVR, LEDs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “A LED Matrix mask built on AVR ATmega8”

  1. eynali says:

    This is Attractive .

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • KH: A power-off current draw of 4mA for the Sony A6000 is a defect, product recall territory. It hits the camera battery with unacceptable wear and...
  • KH: Hydroponics is like home automation. Every year you have folks who start projects like these and think it will take off and become a big...
  • KH: Read the linked article. The A6000 has an unusually high standby/sleep current. The adapter's quiescent current is not an issue, but the A6000 sleep current...
  • Drone: Jeez, the very limited DCA: 40A/400A±3.0% capability, no RMS at all, and the CAT=DEATH rating makes this a NO BUY at any price - much...
  • Drone: Back-Story... Quoting: "HydroBot is a modular control system for automating hydroponic gardens." More about it here: http://protofusion.org/wordpress/2016/07/hydrobot/ Interesting work. But I would like to see...