Categories

App note: F-RAM for smart E-Meters

Posted on Saturday, December 21st, 2013 in app notes by DP

ap_fram_in_smart_meters

Cypress’ application note on smart E-Meters and why its more advantageous to use F-RAM over conventional EEPROMs.

This application note provides an overview of a smart electricity meter, or Smart E-Meter, and explains the benefits of using nonvolatile serial F-RAM rather than EEPROM in Smart E-Meter designs.

This entry was posted on Saturday, December 21st, 2013 at 5:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “App note: F-RAM for smart E-Meters”

  1. Tom P. says:

    TI currently have a promotion on their MSP-EXP430FR5739 F-RAM dev board,it’s more than 50% off:

    http://e2e.ti.com/blogs_/b/msp430blog/archive/2013/12/17/get-a-chronos-for-christmas-or-an-fram-experimenter-39-s-board.aspx

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Drone: Gee, just the sight of one of these HP493A TWT laboratory amps brings back decades-old memories. There are four models covering 1-12.4 GHz in steps...
  • KH: After reading all the comments, I have questions: Does this mean STM32 and AVR boards/parts from dodgy online sellers are suspect? What are your opinions?...
  • Sjaak: They are available with more flash then their ST counterparts which makes them more interesting. You don't have to port the code, but use another...
  • Sjaak: I dunno if you can 'license' register definitions, but I'm not a lawyer. Since the chip is available since 2015 and I haven't heard of...
  • Sjaak: They can be found on taobao or the Chinese markets in Shenzhen.