GPS clock prototyping, Part II

Posted on Monday, November 4th, 2013 in clock by DP


Kevin Rye posted an update on his GPS clock project we covered previously:

It’s been a few months since I worked on the GPS clock. I couldn’t nail down exactly how I wanted it to work. I had a few ideas floating around, as well as a list of what features I wanted to include. However, in order to build the clock without compromises, I would have to overcome several hurdles. Considering I was already juggling a few other projects, I figured it was best to shelf it until I had a clearer vision of exactly how I wanted it to work and how I’d pull it off.

This entry was posted on Monday, November 4th, 2013 at 7:00 pm and is filed under clock. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “GPS clock prototyping, Part II”

  1. Kevin says:

    I’m still plugging away at finished up the code. I still have to do all the alarm stuff. Then it’s on to designing the PCB. This is my first project using an Atmega2560, so it’s a little more complicated than the previous things I’ve made with 328s, but it’s fun!

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Nathan Johnson: 100 channels. Not many are legal in any given area. Be sure to comply with local laws.
  • William Brodie-Tyrrell: It's getting to the point where it's cheaper and definitely easier to use a Pi Zero or similar and a $20 3G USB dongle. Power...
  • KH: IIRC most of the actual operating system of modern HDDs is in one of the platter(s); the stuff on the 25VF010 is a bootup firmware......
  • Trev: I don't know of any inexpensive 3G modules (prices start around $US 50), but it does explain why 2G modules are relatively inexpensive by comparison....
  • Zonie: This site Rocks!