Categories

Kicad tutorial: PCB edges

Posted on Thursday, February 28th, 2013 in PCBs, tutorials by DP

edges_3_layer_corner

Here’s a short Kicad tutorial¬† by Wayne and Layne: PCB edges

An important part of designing a PCB is to clearly indicate the outline of the board, so the board house will know how to cut your boards apart. Most PCBs are rectangular, but sometimes you want to add a more complex outline (like a circle or hexagon) or a very complex outline

This entry was posted on Thursday, February 28th, 2013 at 6:00 pm and is filed under PCBs, tutorials. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Kicad tutorial: PCB edges”

  1. Paul says:

    That’s helpful, thanks!

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Pekka Akselin: This is ridiculous!? :-) We are back at 256(!) byte EPROMs that needed multiple, a handful, of voltages to run! :-(
  • KH: Let's try a back-of-envelope calc balancing energies. From MCP1700 datasheet, there are graphs for a 200mA load step. Estimate the energy shortfall as 12uJ. Say...
  • Daniel: It's been a week and my comment is still awaiting moderation. Apparently the CIA doesn't want their involvement known?
  • KH: Agree, so okay, I guess he must have learned from somewhere. 100nF and 1000uF is so far apart, that was jarring; it's more magic incantation...
  • Max: I have a suspicion the hefty electrolytic cap might be some sort of cargo cult carry-over from other RF-based projects - for instance, I've seen...