Categories

v2 QFP surface mount protoboard 0.80mm available at Seeed

Posted on Tuesday, February 5th, 2013 in Prototypes by DP

protoboardv2_02-W600

An updated version of the QFP surface mount protoboard is now in the Seeed shop. This revision uses the Sick of Beige DP10080 standard. All footprints have been reworked and extended for easier hand soldering.

Sometimes we have the wrong size protoboard for a new chip. Now there’s a second 0.50mm footprint on the back side of the 0.80mm protoboard. That increases the chances it’ll fit whatever chip you’ve got.

You can get one for $10 at Seeed Studio.

This entry was posted on Tuesday, February 5th, 2013 at 11:00 am and is filed under Prototypes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “v2 QFP surface mount protoboard 0.80mm available at Seeed”

  1. Xykon says:

    I like the new boards. I’ll get some with my next Seeed order.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Blars: Any lead-acid has to high of self-discharge for any multi-year application without charging. LiFePO4 prismatic cells are nice and have a flat discharge. Would a...
  • Bob: Jambalaya rocks.
  • KH: I should point out something... well, lead acid car batteries are designed to be well-charged all the time. The plates (which are patterned and thin)...
  • David Haile: You are a smart person and absolutely correct. That kind of current needs a lead acid car battery behind it. Still, it does have its...
  • KH: The solution discussed in the linked article is wrong. It's a largish Lipo (2500mAh) and he thinks 77uA is acceptable... ha ha ha ha ha....