DIY vacuum part pickup tool

Posted on Monday, February 4th, 2013 in DIY, tools by DP


Geir shared his idea on how to convert the AOYUE 968 fume extraction tube into a DIY vacuum part pickup tool. All you need is a cheap manual pickup tool, a small valve, and lots of tape (the universal tool).

Via the forum.


This entry was posted on Monday, February 4th, 2013 at 5:00 pm and is filed under DIY, tools. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Stephen Tinius: Thank you.
  • KH: Ah, the site sells boards, that's the reason. At least it's a XC6SL9 board that does not cost an arm and a leg, though it...
  • Max: While I understand this is more educational than practical in nature, I prefer my edutainment a lot more firmly grounded in economic reality. Sure, you...
  • KH: Using an alkaline coin cell down to 1.0V or under is a very bad idea anyway, unless you as the designer or manufacturer don't care...
  • KH: Farnell says TS1001 is no longer stocked. Not on RS. Digikey says it's obsolete. That said, there are a lot of nanoamp-class parts on sale...