Categories

A simple, flexible adjustable dummy load

Posted on Monday, January 7th, 2013 in project logs by DP

reload-layout

Nickjohnson posted his flexible dummy load project in the project log forum:

I’ve been testing Loki’s power supply lately, and hurting for the lack of a good dummy load. There are plenty of flexible dummy load projects out there, but they’re largely over-engineered and on the expensive side. I decided to put together a really simple but flexible dummy load.

Via the forum.

This entry was posted on Monday, January 7th, 2013 at 5:00 pm and is filed under project logs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “A simple, flexible adjustable dummy load”

  1. John says:

    Hi,
    Just wondering, how can I use the dummy load you created to test a negative power supply?
    Thanks!
    John

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • KH: A power-off current draw of 4mA for the Sony A6000 is a defect, product recall territory. It hits the camera battery with unacceptable wear and...
  • KH: Hydroponics is like home automation. Every year you have folks who start projects like these and think it will take off and become a big...
  • KH: Read the linked article. The A6000 has an unusually high standby/sleep current. The adapter's quiescent current is not an issue, but the A6000 sleep current...
  • Drone: Jeez, the very limited DCA: 40A/400A±3.0% capability, no RMS at all, and the CAT=DEATH rating makes this a NO BUY at any price - much...
  • Drone: Back-Story... Quoting: "HydroBot is a modular control system for automating hydroponic gardens." More about it here: http://protofusion.org/wordpress/2016/07/hydrobot/ Interesting work. But I would like to see...