Logic Shrimp v2b free PCB build

Posted on Friday, December 28th, 2012 in builds by DP


Mikelelere built a free Logic Shrimp v2b PCB. This board uses a single 23LC1024 SRAM to capture data on 4 inputs. The current v1 uses four 23K256s with each recording a single channel. Aerial data lines (SD0 – SD3) are now bi-directional as well.

If you build a free PCB we’ll send you another one! Blog about it, post a picture on Flicker, whatever – we’ll send you a coupon code for the free PCB drawer.

You can get an assembled Logic Shrimp for $34.90.

This entry was posted on Friday, December 28th, 2012 at 9:00 pm and is filed under builds. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Drone: The LM7171 used in this very simple design can be simulated in LTspice with reasonable results at 10MHz using the non-encrypted PSPICE model from TI...
  • Jon Jackson: I would be interested in 1 or 2 of your circuit boards. Jon
  • Max: An actual Saturday "detector" built with the same hardware would use the precisely timed slightly varying length of the day (and some built-in astronomy data)...
  • KH: In the old days, these things remained on paper forever as whimsical scrawls. Today, they are brandished about on blogs for the entire world to...
  • KH: So he doesn't really know what he's doing. Yawn. It's sensor-controlled. It's not an oscillator. A leaf covers the window, you're toast. TLV3702? Overkill. The...