Categories

DIY surround sound dock for Apple iPods and iPhones

Posted on Wednesday, December 5th, 2012 in AVR, project logs by DP

Here is an open source surround sound dock for Apples i-devices. It features the standard Apple connector, has two 1W speakers, and an external output for headphones. It’s uses the LA2610 analog surround sound processor and an ATTiny13  microcontroller.

This entry was posted on Wednesday, December 5th, 2012 at 9:00 pm and is filed under AVR, project logs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • KH: A power-off current draw of 4mA for the Sony A6000 is a defect, product recall territory. It hits the camera battery with unacceptable wear and...
  • KH: Hydroponics is like home automation. Every year you have folks who start projects like these and think it will take off and become a big...
  • KH: Read the linked article. The A6000 has an unusually high standby/sleep current. The adapter's quiescent current is not an issue, but the A6000 sleep current...
  • Drone: Jeez, the very limited DCA: 40A/400A±3.0% capability, no RMS at all, and the CAT=DEATH rating makes this a NO BUY at any price - much...
  • Drone: Back-Story... Quoting: "HydroBot is a modular control system for automating hydroponic gardens." More about it here: http://protofusion.org/wordpress/2016/07/hydrobot/ Interesting work. But I would like to see...