Categories

Breakout board for PIC16F628/88/1827/1847 microcontrollers

Posted on Tuesday, August 28th, 2012 in dev boards by DP

Raj designed a development board for some of the popular PIC16F microcontrollers. It features everything necessary to get them going. The board includes a reset button, crystal oscillator, power supply, and a pin controlled LED.

If you are planning on developing an application using 18-pin PIC16F series microcontroller, this board provides all the basic elements that are required to get you going. I have got 8 PCBs for sale. If anyone is interested, let me know.

This entry was posted on Tuesday, August 28th, 2012 at 7:00 pm and is filed under dev boards. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

3 Responses to “Breakout board for PIC16F628/88/1827/1847 microcontrollers”

  1. Trev says:

    No crystal oscillator, but a resonator instead.

  2. kmmankad says:

    Another small bit of advice to Raj,would be to have the 2 male headers at a distance apart which is in integral multiples of 0.1″,so this board can be plugged into a breadboard directly…

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Drone: Gee, just the sight of one of these HP493A TWT laboratory amps brings back decades-old memories. There are four models covering 1-12.4 GHz in steps...
  • KH: After reading all the comments, I have questions: Does this mean STM32 and AVR boards/parts from dodgy online sellers are suspect? What are your opinions?...
  • Sjaak: They are available with more flash then their ST counterparts which makes them more interesting. You don't have to port the code, but use another...
  • Sjaak: I dunno if you can 'license' register definitions, but I'm not a lawyer. Since the chip is available since 2015 and I haven't heard of...
  • Sjaak: They can be found on taobao or the Chinese markets in Shenzhen.