Categories

DIY electomagnetic interference detector

Posted on Thursday, May 17th, 2012 in Arduino, code, DIY by the machinegeek


Popular Mechanics presents this simple DIY electromagnetic interference (EMI) detector project. It’s Arduino based and requires only an 8-ohm speaker, 1-megaohm resistor and 3–5 feet of insulated solid core wire.

Details on this easy beginner’s project can be found on the Popular Mechanics website, with links to the Arduino sketch on the author’s Github page.

This entry was posted on Thursday, May 17th, 2012 at 2:54 pm and is filed under Arduino, code, DIY. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Sjaak: In theory the buspirate can also do SWD or JTAG as it just wiggling some pins. I dunno if the speed and memory is sufficient...
  • Drone: Aw, how-come Bus-Pirate can't do all this too?
  • Siddharth: Grate
  • jeanmarc78: hello
  • KH: So I guess, don't mind us dinosaurs too much. Someone like me will get triggered by some of the things Arduino folks do. There's just...