Categories

Simple USB to UART adapter that works with 3.3V and 5V UART signals

Posted on Monday, January 9th, 2012 in project logs by DP

The serial UART is a common interface used by many chips and devices. Ginpb designed a USB-to-UART adapter that works with 3.3V and 5V UART signals. The device is based around the FTDI FT232BL USB-to-UART IC with an added 3.3V power supply. The different interface levels are selected by an on-board jumper.

Via the forum.

This entry was posted on Monday, January 9th, 2012 at 11:00 am and is filed under project logs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • gant: They still have a couple of the more expensive (but still considerably cheap) 5S-I-S01 in stock...
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...