Categories

Programming the STM32F4 DISCOVERY with the Bus Blaster

Posted on Thursday, November 3rd, 2011 in Bus Blaster, how-to, open source, programmers by the machinegeek


Nabil wrote to say, “I’ve had success programming and debugging using the Bus Blaster. In this post I will show you how to program and debug the Discovery board using open source hardware and software.”

Via the contact form.

This entry was posted on Thursday, November 3rd, 2011 at 7:43 pm and is filed under Bus Blaster, how-to, open source, programmers. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

5 Responses to “Programming the STM32F4 DISCOVERY with the Bus Blaster”

  1. KarlP says:

    Sure, that works, but you know, you can also just plug the usb port in, and use https://github.com/texane/stlink It’s already been updated to support the F4 discovery kit, and includes examples. :) Ok, so it doesn’t use a BusBlaster though :)

  2. KarlP says:

    Sure, that works, but you know, you can also just plug the usb port in, and use https://github.com/texane/stlink It’s already been updated to support the F4 discovery kit, and includes examples. :) Ok, so it doesn’t use a BusBlaster though :)

  3. I think it’t really cool Nabil achieved this using the Bus Blaster. Congratulations! Hell I want my own busblaster too :)

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Craig B: Shouldn't the default be 00xxx010? Note that bit 0 appears out of order in the documentation. In that case I think the initial value is...
  • JJM: From the datasheet extract you are showing, the power up status should be 00xxx010, not 000xxx01. Bit numbering is misleading since 'measurement resolution' is apparently...
  • Jan Ciger (@janoc200): Hmm, that could actually explain why the three sensor IMU breakout I have bought a few years ago had all sorts of issues - I...
  • Travis: Is it preset to the windows 3 fingered salute?
  • Glenn: What a cool idea !