Bus Pirate demo board v3.0 free PCB build

Posted on Sunday, August 28th, 2011 in builds by Ian

Menno built a free Bus Pirate demo board v3.5 .

If you build a free PCB we’ll send you another one! Blog about it, post a picture on Flicker, whatever – we’ll send you a coupon code for the free PCB drawer.

Get your own handy Bus Pirate for $30, including world-wide shipping. Also available from our friendly distributors.

This entry was posted on Sunday, August 28th, 2011 at 12:00 pm and is filed under builds. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

4 Responses to “Bus Pirate demo board v3.0 free PCB build”

  1. Mike Burr says:

    Looks like a good way to start Playing with my Microchip F1 board, and also work out a way to start doing CPLD JTAG via USB instead of trying to find a computer with Serial

  2. EschatologicalEngineer says:

    I just got my first FreePCB, the BusPirate EDemoBoard v3.0 , which I lusted over and am excited to work on. I appreciate the picture Menno, I understand there were issues with the original design of the 3EEPROM / demo board’s B.O.M. costing more than the price of the buspirate itself but I look forward populating my PCB as much as I can, possibly finding replacements for any EOL / discontinued components & using this great educational tool to familiarize myself more with the bus pirate.

    I’ve learned so much from the few chips I’ve experimented with, all thanks to the bus pirate.I know this board (or the amount of it I am capable of populating) will be another step in the direction of a well rounded self education.

    A bit of the mask was chipped away so I also got to use my circuitworks overcoat pen for the first time. I’m curious to see how well it works once it fully dries.

    and great thanks to Ian for the inspiration, encouragement & tolerating my long freakin emails. I’ll move my chatter to the forums in the next week so we can open up dialog.

    May your solder joints be not cold,

    -ElectricEschaton- .EschatologicalEngineer. ,dan from KS

    • Filip says:

      Thanks for the comment, We are working on a demoboard v5 right now, that uses a single cheap PIC to emulate the various different ICs. By adding/removing jumpers you are able to select the protocol I2C/SPI/or UART, and select the device you want to control, EEPROM/PWM generator/ADC/and DAC…the DAC and PWM you can setupt trought he protocol and read the values over the AUX/ADC pins of the Bus Pirate as well…

      P.S. my we quote your comment on the blog?

  3. EschatologicalEngineer says:

    The PIC based design is clever. It’s kind of funny how good of a solution to cost it is, as it seems like the sort of simple : over-complication that I am prone to. Duh, use an MCU in place of individual components. But there is something satisfyingly educational for a beginner like myself, to physically work with each individual device and its associated protocol, as opposed to designating a single Microcontroller to act as the multilingual.

    It seems like the new design would teach the principals of interaction by the various buses in a different way. Perhaps its insignificant, but the initialization of communication through sending a signal to an IC or by enabling it to occur programmatically, both offer a valuable yet differing experience. I look for forward to working with the PIC version after finished learning all that V3 has to teach me.

    It’s an exciting and rewarding wisdom to seek; the ways in which technology speaks. Such subtle differences in dialect between individual protocols, capable of manufacturing & understanding messages of its own design and interfacing love lorn components on PCBs everywhere! What a joy to listen to them speak, all thanks to the Bus Pirate: The tower of babel for integrated circuitry.

    Yours & covered in flux,

    –ElectricEschaton- .EschatologicalEngineer. ,dan from KS–

    p.s. — filip said: “P.S. my we quote your comment on the blog?” if that was directed at me, please do. i would be honored :)

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • KH: Well, I'm sure the HDD can handle a little vibration *cough*. What I am more interested in is this: the fan appears to be placed...
  • Alan: The Si5351 runs on 3.3V, and several FPGA dev boards now include "Arduino compatible" headers [if you stick to 3.3V logic levels]. Maybe it's time...
  • hli: Sunday++
  • JB: Hi
  • Peter: Sunday