Categories

CPLD dev-board button bouncieness

Posted on Monday, May 16th, 2011 in CPLD by Ian

voidptr tested the bouncieness of the CPLD development board button and found it to be pretty good. XSVF and SVF files are available to download if you’d like to program the CPLD and try it yourself.

that little switch is not bouncy … 1 bounce each 4 or 5 clicks … a lot better that some other switch !
i didnt look with an scope yet but got some result with a counter …

Via the forum.

CoolRunner-II and XC9572XL versions available for $15.

This entry was posted on Monday, May 16th, 2011 at 11:37 am and is filed under CPLD. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • gant: They still have a couple of the more expensive (but still considerably cheap) 5S-I-S01 in stock...
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...