Categories

Alternative Logic Sniffer client v0.9.4 RC1

Posted on Wednesday, March 30th, 2011 in logic analyzer, software by Ian

A release candidate of Jawi’s Logic Sniffer client is available for beta testers.

It took longer than originally anticipated, but it is finally available: the first Release Candidate (RC) of the 0.9.4 version!

Implemented features and issues solved in this release:

  • VCD exports ignore selected channel groups
  • Verify frequency measurement with RLE captures
  • Support OLS-device profiles for BP, regular OLS and SUMP
  • Add icon to window/application
  • 200MHz capture fails halfway
  • Add warning message about highest channel icw RLE
  • When RLE is enabled the first value rendered is always low
  • Is it possible to disable DTR when opening the serial
  • No menu entry for ‘capture’ functions
  • Preferences in Edit/Preferences dialog are not saved
  • Stop button now always enabled
  • RLE channel group issue with 0.9.4-b1
  • I2C decoder produces invalid address
  • Add “Jump to Marker” buttons for remaining cursors

A call to all beta testers: grab an archive and test away using the testing charter:

All issues found should be reported as issue on GitHub and can be discussed in this topic.

If tested, could you post a message in this topic stating the platforms (operating system + version, 32/64-bit, and used hardware) on which you’ve tested it, and possibly the issue numbers verified?

Get a Logic Sniffer for $50, with free worldwide shipping.

This entry was posted on Wednesday, March 30th, 2011 at 2:42 pm and is filed under logic analyzer, software. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

2 Responses to “Alternative Logic Sniffer client v0.9.4 RC1”

  1. * Support OLS-device profiles for BP

    Does this means that client support the BusPirate ?

    • Ian says:

      Yes, and now it also has a custom profile system that identifies the Bus Pirate and knows the specific settings. Same for IR Toy, OLS, and a few new devices (arduino LA).

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please