Categories

Posts Tagged ‘tinyK20’

Fascinating details of Waveshare e-paper displays

Thursday, November 9th, 2017

Erich Styger has a nice write-up on Waveshare e-paper displays: I have used E-Ink displays in projects three years ago, but from that time the technology has greatly evolved. That time displays were hard to get, expensive and difficult to use. Now things seem to change with e-ink displays available to...

Tags: ,
Posted in part review | 1 Comment »

nRF24L01+ 2.4 GHz wireless connectivity with the tinyK20 board

Thursday, March 17th, 2016

Erich Styger writes: I’m using the tiny and inexpensive Nordic Semiconductor nRF24L01+ transceiver (see “Tutorial: Nordic Semiconductor nRF24L01+ with the Freescale FRDM-K64F Board“) in many projects: it costs less than $3 and allows me to communicate with a proprietary 2.4GHz protocol in a low power way (see “IoT: FreeRTOS Down to...

Tags: ,
Posted in ARM, wireless | No Comments »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please