Categories

Posts Tagged ‘Si5351’

SI5351 signal generator test gadget

Tuesday, August 7th, 2018

DuWayne published a new build: I have been spending way too much time playing with the new 3D printer, so have to get back to some electronics.  Since the next CWTD.ORG episode is coming up, I decided to build another 'Test Gadget'.  This time it is a Signal Generator based...

Tags: ,
Posted in gadget, testing | No Comments »

SI5351 VFO project

Tuesday, May 22nd, 2018

Dave Richards (a.k.a. AA7EE) has a nice write-up about building another Si5351 VFO project: To many, this will be just another Si5351 VFO project, with nothing to distinguish it from the others. In fact, that’s exactly what it is. The “how to” of connecting an Arduino board to an Si5351...

Tags: , ,
Posted in DIY | 1 Comment »

A two channel SI5351 signal generator

Thursday, October 12th, 2017

DuWayne Schmidlkofer has a nice write-up on building a two channel SI5351 signal generator: After getting the sketches written for the SI5351 board written to support multiple display types, I decided I need to write one more. Now that Pete is moving the Simpleceiver to a single conversion super-het, I...

Tags: , ,
Posted in RF | No Comments »

Shirt Pocket Transceiver with the Si5351 and OLED

Monday, January 16th, 2017

Pete Juliano's (N6QW) Shirt Pocket Transceiver with the Si5351 and OLED display: In 2011 I fulfilled a dream of building a shirt pocket sized QRP SSB transceiver. Well actually I built two of them and the second was a diminutive 2" X 4" X 2". Both used through hole components...

Tags: ,
Posted in RF | No Comments »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please