Categories

Posts Tagged ‘rain sensor’

An open source rain and humidity sensor couple

Wednesday, August 2nd, 2017

Boris Landoni writes about a new open source rain and humidity sensor project: It detects humidity through two sensors which are to be used alternatively to let us know when there is water on the ground because it’s raining, or when the water level in a flowerpot is too low and...

Tags:
Posted in open source, sensors | 2 Comments »

An open source Rain Sensor and controller

Thursday, January 26th, 2017

Boris Landoni from Open Electronics writes about a new open source Rain Sensor and controller: Designed to be coupled to an irrigation controller, a weather station or motorized curtains and rolling shutters, it shuts down a relay when rain is detected. Full details at Open Electronics project page.

Tags:
Posted in open source, sensors | 1 Comment »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please